In 1998, Mattel-Tyco out of Mt. Laurel, New Jersey, USA developed a new line of Matchbox product called Matchbox Adventure Pack with Color Changing Action. The line included eight (8) two-model action sets each featuring one model with a color changing capability and a second model with a water spraying feature. The models were developed from pre-existing miniature range models.
Special paint application for the color changing feature and water bladder attachments for water spray feature were developed for the series. The color changing part on the model would change color when sprayed with warm or cool water. Four of the eight sets made it to a short run production before being cancelled. The remaining four sets did not appear to have progressed beyond early development stage. None of the sets made it to market.
The sets were Mining, TB 002 Tanker Blaze, TB 007 Jet fire, House (Cottage) Transporter, TB 004 Shark Transport, TB 006 Police Siege, Bear Attack, and Shark Attack.
THE SETS
The Mining set featured the MB 209 Faun Dump truck with a color changing dirt load mated with a modified MB 029 Tractor Shovel with water bladder and hose. The dump used the same dirt load as issued in the Adventure Pack Mining set. The dirt load changed from brown to gold when sprayed with warm water. Early mockups of the Tractor Shovel featured a handle on the sides of the shovel. The flame logo on the back of the Tractor Shovel’s tank seems a bit confusing.
|
Final Sample of Gold Mining Set. Note flame logo on back of Tractor Shovel bladder.
|
Cold livery is dark load shown in bed of dump. Warm livery is gold load shown to right.
|
|
Concept drawing of Tractor Shovel with bladder tank assembly on rear.
|
|
The TB 002 Tanker Blaze set featured the MB 100 Peterbilt Tanker with a color changing tank and a modified MB 134 Extending Ladder Fire Truck (Oshkosh) with water bladder and hose. The plastic tank on the back of the Peterbilt was light colored with red and yellow stripes when warmed and a dark tank with red and yellow flames when cooled. The fire truck had an opaque bladder mounted to the top with a hose to squirt water on the burning Peterbilt.
|
Final samples of Tanker Blaze Set. Models shown are production grade.
|
Early samples of Tanker Blaze Set. Fire Truck has early design of bladder and decal livery. Tanker color actually changes.
|
|
Concept Drawing of Fire Truck with bladder tank assembly and hose.
|
|
The TB 007 Jet Fire set featured the MB 146 Plane Transporter with color changing plastic jet and a modified MB 036 Ford Refuse Truck with water bladder and hose. The Transporter Truck featured a matte green finish – same as the Water Tanker. When cool, the upper body of the jet would remain dark green. When warmed, battle damage would appear on the wings as well as J58 on the tail. The wings were made of opaque plastic where earlier mockups attempted to use clear plastic wings with painted surfaces. Early mockups of the tanker had the tank marked Jet Fuel. Why would one pour fuel on a fire?
|
Final sample of Jet Fire Set. Note chrome wheels on transporter and “Water” on tanker.
|
Final samples of the jets. Cold jet on Transporter to the left. Warmed jet with battle damage on right.
|
The House Transporter set featured a modified MB 315 Volvo Flatbed Truck with a color changing house load and a modified MB 314 Mobile Crane with water bladder and hose. When I first saw the early prototype of the Truck and cottage I was very excited as I thought it was an attempt to reissue models themed on earlier Lesney designs – in this case the Site Hut Truck. I felt the black and white contrast made for an exciting look. I was taken back a bit when I saw the bright colors on the final sample models. The house on flatbed platform was never issued. The crane feature on the truck still worked with the modified bladder.
|
Early sample of House Transporter set. Bladder on crane is solid hard resin for mockup. The white plastic cottage has no paint applied to it. |
Final samples of truck and cottage. Warm livery of house shows vivid colors as shown on back of truck. Cold livery shows pale as shown on right. |
|
Final sample of Cottage Transporter set. Note vivid colors on cottage in its cold livery and the cottage logo on the Volvo cab doors and sides of the crane.
|
|
Concept drawings of cottage on truck bed assembly – front and side views.
|
Concept drawing of cottage on truck bed assembly.
|
The TB 004 Shark Transport set featured a modified MB 389 Volvo Tank Truck (open top) and a modified MB 100 Peterbilt Tanker with rubber bladder and hose. The set also featured a small plastic shark. The Volvo was most likely to be issued in aqua green truck with white stripe but trucks in reverse colors were mocked up as well. The sides of the tank were marked Caution with a shark logo. The tank was reported to be a solid color such as yellow when cool and then turn clear (to see the shark) when warm water was added. The white Peterbilt Tanker was equipped with an aqua green bladder with white H2O deco and a hose. None of any clear plastic models in this set have color changing paint. This set is not known to have made it passed the development stage.
|
Early sample of TB 004 Shark Transport Set. Bladder on Peterbilt is made of rubber and works. Note green color of Volvo Truck.
|
Early samples of the Volvo Trucks with a painted yellow container and a translucent container.
|
|
Concept drawing of Peterbilt Tanker with bladder assembly and hose.
|
The TB 006 Police Siege set is where things started going a bit violent. It featured an MB 148 Volvo Container Truck with small plastic gunman and loot inside the rear container paired with a modified MB 153 Mission Helicopter with water bladder gun/missile. The prototypes I have seen had the Volvo in black with the grey container in Moving Co. livery. When sprayed with warm water the box was supposed to go translucent and the gunman with bags of money and stacks of gold were to be visible. Once sprayed with water, the sides of the back were to appear battle damaged and show the interior of the container. The large bladder affixed to the bottom of the Mission Helicopter resembled some type of large gun or missile. The siege scene on the interior has been found in green, grey and beige. The helicopter has been found in black and white Police or blue and white Police Air Unit liveries. I believe the latter was the intended livery. The set also never made it past development.
|
A mounted early mockup of Police TB 006 Police Siege Set. Note the production helicopter in this early mockup.
|
|
Later design for helicopter in TB 006 Police Siege Set. Note blue and white livery as well as red nozzle on tank.
|
|
Design mockups of the Volvo Moving Truck with gunman and loot. Note decals on container sides on model to right simulating battle damage. Also note container insert piece with gunman, bags of loot, and stacks of gold.
|
The Bear Attack set featured a modified MB 186 Dodge Dakota Pickup with camper plus a modified MB 188 GMC Wrecker converted into a cistern tanker truck. The Dodge is a modified prototype with the roll bar removed and a plastic camper attached. Campers can be found in grey or blue with no deco or in white with label decoration applied to them. The stickers depicted signs of a bear attack and frightened family in the camper. The camper was purported to change color when sprayed to show signs of a bear attack. A plastic bear also was designed for the set.
The camper truck would have made a great model for the 1-75 line. The Cistern Truck, as I call it, only made it to a hard resin bladder and hand decorated decal prototype stage. A rubber master mold of the bladder was made for the back of the GMC but I have never seen one actually installed on the truck. The models on the presentation plinth give an idea how the models would have appeared in pack. Kind of frightening for children I think. The camper truck remains one of my favorite models.
|
Prototype set of Bear Attack mounted on plinth
|
|
Prototype sample of Camper back in white with stickers showing bear damage view from left side of vehicle. Note claw marks.
|
Prototype sample of Camper back in white with stickers showing bear damage view from right side of vehicle.
|
Lastly, the Shark Attack set featured the venerable Lesney designed No. 9 Boat and Trailer hooked to a modified MB 230 Isuzu Amigo with raft load. This set also came with a shark. I can only guess the color changing feature on the boat would have been to show shark damage. The Amigo’s bladder was made of hard resin and the deco consists of hand applied decals. These two models are mounted to a cardboard plinth in prep for prototype package assembly. Like the bladder for the Bear Attack set, a master rubber mold of the bladder was produced for the Isuzu Amigo although I have not seen samples of it installed.
|
Early mockup of Shark Attack set. Load on back of Amigo is resin.
|
THE DEVELOPMENT
I am not aware of any versions of the Shark Transport, Police Siege, Bear Attack or Shark Attack sets where the color changing feature worked. Some test bladders were made of very brittle material that did not work. When I first had a chance to inspect a tank and hose for the Jet Attack Tanker Truck, the plastic tank was so brittle I broke the base of the tank with only slight pressure from my thumb.
|
Various bladders from the MB 036 Refuse Truck turned Tanker truck for the Jet Blaze Set. Note the very brittle white tank with thumb hole on the left. Also note the various sample nozzles tested.
|
The design of this series not only required the development of color changing plastic parts, but also the development of the water spraying function. Bladders, hoses, nozzles, bladder mount attachments, and other plastic pieces like the shark, house, gunmen, and dirt load had to be created. In all I counted at least 28 parts that had to be designed or modified to fit existing models to make this series work. Quite a bit of time and resources were invested in this line’s development
|
On left, tampo deco masters for color changing jet (Jet Fire set). On right, sample decals for Mission Helicopter (Police Siege set). Decals were for prototype design only.
|
Prototype and sample parts (left to right): Prototype rubber bladder in grey and rubber master mold of bladder for Fire Truck (Tanker Blaze set), mockup of red painted hard resin bladder on black mount for Tractor Shovel plus beige colored rubber bladder for Tractor Shovel (Mining set).
|
|
Several prototype samples of the Jet from the Jet Fire set. Note clear wings with deco on two models at front. Final sample is dark green model to the right.
|
At rear: brass molds for the rubber bladder from the Peterbilt Tanker (Shark Transport) and Mission Chopper (Police Siege). At front: one of four copper plates used to apply the red and yellow color changing paint on the side of the Peterbilt Tanker (Tanker Blaze).
|
THE NEARLY FINISHED PRODUCT or OOOH SO CLOSE!
Several sets made it into mockup packaging including the Mining, Tanker Blaze, and House Transport Sets.
|
Sample pack of Mining set.
|
Sample pack of Tanker Blaze set.
|
|
Sample set of House Transport models in Jet Fire package.
|
Several plastic pieces developed for this series and for the regular Adventure Pack series did eventually make their way to market. The shark tank, shark, and the dirt load for the Faun Dump were released in the regular Adventure Pack Series.
The samples shown here prove that there was an intensive development in graphics, new concept design, and new tooling. Unfortunately, yet another set of fun models we never got to see on store shelves.
By: C. Wiersma
2/10/2015
















































































Leave a Reply